3M 6006 Multi Gas Vapor Cartridge

3M 6006 Multi Gas Vapor Cartridge

$14.99
3M 6006 Multi Gas Vapor Cartridge
$14.99
Item#: 3M0248
Ships Tomorrow

Quantity 
Buy 3M 6006 Multi Gas Vapor Cartridge
Free Shipping Over $150*

 
Replacement cartridge/filter for 6291, 6391, and all 6000 series 3M respirators. NIOSH approved for certain organic vapors including chlorine, hydrogen chloride, chlorine dioxide, sulfur dioxide, hydrogen sulfide escape only, ammonia/methylamine, formaldehyde and hydrogen fluoride. This list is not exhaustive, but representative of the types of chemicals/compounds filtered by this cartridge. When properly fitted, this cartridge can protect against concentrations of these chemical vapors up to ten times the Permissible Exposure Limit PEL. Ideal for those working in lab environments and other areas where these compounds are common. Great for people dealing with Multiple Chemical Sensitivity, MCS. Replace after 60 hours of use or every three months. If you smell or taste vapors coming through the cartridge, called "breakthrough", replace the filter. Replacement times will vary depending on usage and environmental factors. Store in sealed container when not in use to extend the life of the filters. 1 Pair per package.

3M 6006 Multi Gas Cartridge/Filter - Customer Reviews

Write A Review
  No review title given
Reviewed by: 3M Fan from El Cajon, CA

Used these for a couple employees cleaning up some spills around our warehouse and seem to do the trick.

Customer Q & A

Q1: I have the 3M 6006 multi gas vapor mask. I have it all assembled. I have 2 questions. How can I test the mask to make sure it is functioning? When I cover the cartridges...the mask does not pull against my face my second question is: where is the end of use indicator located on the cartridge? Please respond! Thank you.

A: The easiest fit test is to cover the filters with your hands and inhale. Don't inhale extremely hard as this can possible disrupt the function of the exhale valve and cause air to enter through it. That exhale valve is a thin rubber flap so if you inhale hard enough to pull it into the interior of the mask, it won't work properly until you readjust it. If air is not entering in there, then it's likely simply fit, which with this mask means tightening the straps. The mask doesn't have to pull in against your face, but you shouldn't be able to draw air in with you have the filters completely covered with your hands. An easier way to test fit since the filters have a larger surface area, remove the filters and cover the openings in the mask where the filter attach with your hands. Lastly, there is no indicator. These cartridges do have a small white area on one of the short edges. You can date them with a pen or sharpie. After 50-60 hours of use, three months or use, or if you notice "breakthrough", replace them. Breakthrough is when you'll start to notice odors passing through the mask. At this point, the cartridges have adsorbed all that they can and are allowing smoke/odors/chemical vapors to pass through. Hope that helps!

Read all Q & A

Ask a Question Ask a Question
Do you have a question about this product? Ask a Product Expert! The answer will be emailed to you and posted for the benefit of other shoppers.

Share
Could not wait to try Safeguard Window Filters. I am using them, am very pleased and have high hopes that my solution to open windows is at hand!
More Testimonials