Slant/Fin Humidifier Operating Instructions

1. Place the base of the unit on a firm, flat, level and water resistant surface.

2. Fill the water tanks according to the instructions and place on humidifier base.

3. Plug the power cord firmly and completely into the wall outlet.

4. Turn the power switch to either the LO or HI position (Lights may flicker momentarily). Then turn the relative humidity knob clockwise until you hear a faint click and the power light comes on. It will be normal for the humidifier to take a few minutes to warm up and begin to mist.

5. When the water tanks are empty, (approximately 36 hours running time), the "REFILL WHEN LIT" lamp will go on, and the unit will stop heating. Refer to the "FILLING THE WATER TANKS" section.

6. Whenever the water falls below the level of the probes during operation, the heating element will shut off and stop heating, and the REFILL indicator will light.

7. The unit will operate as long as there is water in either tank and unit will operate with either one or both tanks.

Slant Fin Humidifier Information